Loading ...
Loading ...
Loading ...
Profile and Max Group Binding
UNIT:1/LAGS: Click 1 to configure the physical ports. Click LAGS
to configure
the link aggregation groups.
Select:
Select the desired entry for configuration.
Port:
It is multi-optional. Displays the port number.
Profile ID:
The existing Profile ID bound to the selected port.
Max Group:
The maximum multicast group a port can join.
Overflow Action:
The policy should be taken when the number of multicast group
a port has joined reach the maximum.
Drop
: Drop the successive report packet, and this port can
not join any other multicast group.
Replace
: When the number of the dynamic multicast
groups that a port joins has exceeded the max-
group, the
newly joined multicast group will replace an existing
multicast group with the lowest multicast group address.
LAG:
Displays the LAG number which the port belongs to.
Clear Binding: Click the ClearBinding
button to clear all profiles bound to the
port.
Configuration Procedure:
Step
Operation
Description
1 Create Profile
Required. Configure the Profile ID and mode on
Multicast→IGMP Snooping→Profile Config page.
2 Configure IP-Range Required. Click Edit
of the specified entry in the IGMP
Profile Info table on Multicast→IGMP Snooping→Profile
Config page to configure the mode or IP-
range of the
Profile.
3 Configure Profile Binding
for ports
Optional. Configure Profile Binding for ports on
Multicast→IGPM Snooping→Porfile Binding page.
8.1.8 Packet Statistics
On this page you can view the multicast data traffic on each port of the switch, which facilitates
you to monitor the IGMP messages in the network.
Choose the menu Multicast→IGMP Snooping→Packet Statistics to load the following page.
107
Loading ...
Loading ...
Loading ...