Loading ...
Loading ...
Loading ...
10.1 PoE Config
All the RJ45 ports on the switch can be configured to supply power for the powered devices
that comply with IEEE 802.3af and IEEE 802.3at. As the power every port or the system can
provide is limited, some attributes should be set to make full use of the power and guarantee
the adequate power to the linked PDs. When the power exceeds the maximum power limit or
the power is inadequate to power the device, the switch may disconnect the power supply to
the PD linked to the port with lower priority. When detecting a PD is unplugged, the switch will
stop supplying the power to the PD.
PoE Config, mainly for PoE attributes configuration, is implemented on PoE Config and PoE
Profile pages.
10.1.1 PoE Config
On this page, you can configure the parameters to implement PoE function.
Choose the menu PoE→PoE Config→PoE Config to load the following page.
Figure 10-1 PoE Config
The following items are displayed on this screen:
Global Config
System Power Limit:
Specify the max power the PoE switch can supply.
System Power
Consumption:
Displays the PoE switch's real time system power consumption.
System Power
Remain:
Displays the PoE switch's real time remaining system power.
Port Config
Port Select: Click the Select button to quick-
select the corresponding
entry based on the port number you entered.
Select:
Select the desired port to configure its parameters.
Port:
Displays the port number.
129
Loading ...
Loading ...
Loading ...