Loading ...
Loading ...
Loading ...
8.1.3 VLAN Config
Multicast groups established by IGMP Snooping are based on VLANs. On this page you can
configure different IGMP parameters for different VLANs.
Choose the menu Multicast→IGMP Snooping→VLAN Config to load the following page.
Figure 8-6 VLAN Config
The following entries are displayed on this screen:
VLAN Config
VLAN ID: Enter the VLAN ID to enable IGMP Snooping for the desir
ed
VLAN.
Router Port Time:
Specify the aging time of the router port. Within this time, if the
switch doesn’
t receive IGMP query message from the router
port, it will consider this port is not a router port any more. By
default, it is 0 and the global router-time will be used.
Member Port Time:
Specify the aging time of the member port. Within this time, if
the switch doesn’
t receive IGMP report message from the
member port, it will consider this port is not a member port any
more. By default, it is 0 and the global member-time will be used.
Router Ports:
Specify the static router port which is mainly used in the
network with stable topology.
Static Router Ports
UNIT:1/LAGS: Click 1 to configure the physical ports. Click LAGS
to configure
the link aggregation groups.
98
Loading ...
Loading ...
Loading ...