User Manual - Page 111

For T1500G-10MPS. Also, The document are for others TP-Link models: T1500G-8T (TL-SG2008), T1500G-10PS (TL-SG2210P)

Loading ...
Loading ...
Loading ...
Member Port Time:
Specify the aging time of the member port. Within this time, if
the switch doesnt rec
eive IGMP report message from the
member port, it will consider this port is not a member port any
more.
Replace Source IP:
Specify the IP address with which the switch will replace the
source of IGMP packets.
Dynamic Router
Ports:
Displays the dynamic router ports of the multicast VLAN.
Static Router Ports:
Specify the static router port which is mainly used in the
network with stable topology.
Forbidden Router
Ports:
Specify the forbidden router ports which is mainly used to forbid
ports becoming router ports.
Note:
1. The router port should be in the multicast VLAN, otherwise the member ports cannot
receive multicast streams.
2. The Multicast VLAN won't take effect unless you first complete the configuration for the
corresponding VLAN owning the port on the 802.1Q VLAN page.
3. Configure the link type of the router port in the multicast VLAN as Tagged otherwise all the
member ports in the multicast VLAN cannot receive multicast streams.
4. After a multicast VLAN is created, all the IGMP packets will be processed only within the
multicast VLAN.
Configuration procedure:
Step
Operation
Description
1
Enable IGMP Snooping
function
Required. Enable IGMP Snooping globally on the switch
and for the port on MulticastIGMP
SnoopingSnooping Config and Port Config page.
2 Create a multicast VLAN
Required. Create a multicast VLAN and add all the
member ports and router ports to the VLAN on the
VLAN802.1Q VLANVLAN Config page.
Configure the link type of the router ports as Tagged.
3
Configure parameters for
multicast VLAN
Optional. Enable and configure a multicast VLAN on the
MulticastIGMP SnoopingMulticast VLAN page.
It is recommended to keep the default time parameters.
4
Look over the
configuration
If it is successfully configured, the VLAN ID of the
multicast VLAN will be displayed in the IGMP Snooping
Status table on the MulticastIGMP
SnoopingSnooping Config page.
Application Example for Multicast VLAN:
101
Loading ...
Loading ...
Loading ...