Loading ...
Loading ...
Loading ...
Choose the menu Network Security→802.1X→Global Config to load the following page.
Figure 12-22 Global Config
The following entries are displayed on this screen:
Global Config
802.1X:
Enable/Disable the 802.1X function.
Auth Method:
Select the Authentication Method from the pull-down
list.
• EAP: EAP relay mode. IEEE 802.1X authentication
system uses extensible authentication protocol
(EAP) to exchange information between the switch
and the client. The EAP protocol packets with
authentication data can be encapsulated in the
advanced protocol (such as RADIUS) packets to
be transmitted to the authentication server.
• PAP:
EAP termination mode. IEEE 802.1X
authentication system uses extensible
authentication protocol (EAP) to exchange
information between the switch and the client. The
transmission of EAP packets is terminated at the
switch and the EAP packets are converted to the
other protocol (such as RADIUS) packets for
transmission.
Handshake:
Enable/Disable the Handshake feature. The Handshake
feature is used to detect the connection status
between the TP-Link 802.1X Client and the switch.
Please disable Handshake feature if you are using
other client softwares instead of TP-Link 802.1X Client.
173
Loading ...
Loading ...
Loading ...