Loading ...
Loading ...
Loading ...
The following entries are displayed on this screen:
Global Config
System Priority:
Specify the system priority for the switch. The system prio
rity and
MAC address constitute the system identification (ID). A lower
system priority value indicates a higher system priority. When
exchanging information between systems, the system with higher
priority determines which link aggregation a link belongs
to, and the
system with lower priority adds the proper links to the link
aggregation according to the selection of its partner.
LACP Config
Select:
Select the desired port for LACP configuration. It is multi-optional.
Port:
Displays the port number.
Ad
min Key: Specify an Admin Key for the port. The member ports in a dynamic
aggregation group must have the same Admin Key.
Port Priority:
Specify a Port Priority for the port. This value determines the
priority of the port to be selected as the dynamic aggregation
group member. The port with smaller Port Priority will be
considered as the preferred one. If the two port priorities are
equal; the port with smaller port number is preferred.
Mode:
Specify LACP mode for your selected port.
Status:
Enable/Disable the LACP feature for your selected port.
LAG:
Displays the LAG number which the port belongs to.
5.3 Traffic Monitor
The Traffic Monitor function, monitoring the traffic of each port, is implemented on the Traffic
Summary and Traffic Statistics pages.
5.3.1 Traffic Summary
Traffic Summary screen displays the traffic information of each port, which facilitates you to
monitor the traffic and analyze the network abnormity.
52
Loading ...
Loading ...
Loading ...