Loading ...
Loading ...
Loading ...
Diagnostic Procedure
NHEC0387
1 INSPECTION START
Turn ignition switch to “START”.
Is any cylinder ignited?
YesorNo
Yes © GO TO 2.
No © GO TO 3.
2 CHECK OVERALL FUNCTION
With CONSULT-II
1. Start engine.
2. Perform “POWER BALANCE” in “ACTIVE TEST” mode with CONSULT-II.
SEF070Y
3. Make sure that each circuit produces a momentary engine speed drop.
Without CONSULT-II
1. Start engine.
2. Listen to each injector operating sound.
MEC703B
Clicking noise should be heard.
OK or NG
OK © INSPECTION END
NG © GO TO 3.
INJECTOR
Diagnostic Procedure
EC-610
Loading ...
Loading ...
Loading ...