Loading ...
Loading ...
Loading ...
SEF705X
10. Tighten fuel tube assembly mounting nuts in numerical
sequence (indicated in the figure at left) and in two stages.
: Tightening torque N·m (kg-m, ft-lb)
1st stage:
9.3 - 10.8 (1.0 - 1.1, 6.9 - 7.9)
2nd stage:
20.6 - 26.5 (2.1 - 2.7, 16 - 19)
11. Install all parts removed in reverse order of removal.
CAUTION:
After properly connecting fuel tube assembly to injector and
fuel hose, check connection for fuel leakage.
SEF058Y
How to Check Idle Speed and Ignition Timing
NHEC0607
IDLE SPEED
NHEC0607S01
I Using CONSULT-II
Check idle speed in “DATA MONITOR” mode with CONSULT-II.
SEF998Z
IGNITION TIMING
NHEC0607S02
Any of following two methods may be used.
I Method A
a) Attach timing light to loop wire as shown.
b) Check ignition timing.
SEF247Q
I Method B
a) Remove No. 1 ignition coil.
BASIC SERVICE PROCEDURE
Injector (Cont’d)
EC-52
Loading ...
Loading ...
Loading ...