Loading ...
Loading ...
Loading ...
8 CHECK SWIRL CONTROL VALVE ACTUATOR
With CONSULT-II
1. Reconnect vacuum hose between swirl control valve actuator and swirl control valve control solenoid valve.
2. Start engine and let it idle.
3. Select “SWIRL CONT SOL/V” in “ACTIVE TEST” mode.
4. Touch “ON” and “OFF” on CONSULT-II screen.
5. Make sure that swirl control valve actuator rod moves according to “SWIRL CONT SOL/V indication.
SEF621X
Without CONSULT-II
1. Reconnect vacuum hose between swirl control valve actuator and swirl control valve control solenoid valve.
2. Start engine and let it idle.
3. Apply 12V direct current between swirl control valve control solenoid valve terminals 1 and 2.
4. Make sure that swirl control valve actuator rod moves according to 12V direct current being applied.
SEF621X
OK or NG
OK © GO TO 9.
NG © Replace swirl control valve and actuator.
GI
MA
EM
LC
FE
AT
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
DTC P1130 SWIRL CONTROL VALVE CONTROL SOLENOID VALVE
Diagnostic Procedure (Cont’d)
EC-465
Loading ...
Loading ...
Loading ...