Loading ...
Loading ...
Loading ...
3 CHECK IGNITION COIL POWER SUPPLY CIRCUIT-I
1. Turn ignition switch ON.
2. Check voltage between ECM terminals 110, 112 and ground with CONSULT-II or tester.
SEF366X
OK or NG
OK © GO TO 4.
NG © Go to TROUBLE DIAGNOSIS FOR POWER SUPPLY, EC-145.
4 CHECK IGNITION COIL POWER SUPPLY CIRCUIT-II
1. Turn ignition switch OFF.
2. Disconnect condenser harness connector.
SEF275X
3. Turn ignition switch ON.
4. Check voltage between condenser terminal 1 and ground with CONSULT-II or tester.
SEF367X
OK or NG
OK © GO TO 10.
NG © GO TO 5.
DTC P1320 IGNITION SIGNAL
Diagnostic Procedure (Cont’d)
EC-512
Loading ...
Loading ...
Loading ...