Loading ...
Loading ...
Loading ...
SEF058Y
DTC Confirmation Procedure
NHEC0194
NOTE:
If “DTC Confirmation Procedure” has been previously conducted,
always turn ignition switch “OFF” and wait at least 10 seconds
before conducting the next test.
TESTING CONDITION:
Before performing the following procedure, confirm that bat-
tery voltage is more than 10.5V.
WITH CONSULT-II
NHEC0194S01
1) Turn ignition switch “ON” and select “DATA MONITOR” mode
with CONSULT-II.
2) Crank engine for at least two seconds.
3) If 1st trip DTC is detected, go to “Diagnostic Procedure”,
EC-346.
WITH GST
NHEC0194S02
Follow the procedure “With CONSULT-II” above.
DTC P0335 CRANKSHAFT POSITION SENSOR (CKPS) (POS)
DTC Confirmation Procedure
EC-344
Loading ...
Loading ...
Loading ...