Loading ...
Loading ...
Loading ...
9 CHECK ECM RELAY
1. Apply 12V direct current between ECM relay terminals 1 and 2.
2. Check continuity between ECM relay terminals 3 and 5, 6 and 7.
SEF296X
OK or NG
OK © GO TO 17.
NG © Replace ECM relay.
10 CHECK CONDENSER GROUND CIRCUIT FOR OPEN AND SHORT
1. Turn ignition switch OFF.
2. Check harness continuity between condenser terminal 2 and engine ground. Refer to Wiring Diagram.
Continuity should exist.
3. Also check harness for short to power.
OK or NG
OK © GO TO 11.
NG © Repair open circuit or short to power in harness or connectors.
11 CHECK CONDENSER
Check resistance between condenser terminals 1 and 2.
SEF369X
OK or NG
OK © GO TO 12.
NG © Replace condenser.
DTC P1320 IGNITION SIGNAL
Diagnostic Procedure (Cont’d)
EC-514
Loading ...
Loading ...
Loading ...