Loading ...
Loading ...
Loading ...
SEF174Y
PROCEDURE FOR MALFUNCTION C
NHEC0528S03
TESTING CONDITION:
I Always perform the test at a temperature above 5°C (41°F).
I Before performing the following procedure, confirm that
battery voltage is more than 10V at idle.
With CONSULT-II
NHEC0528S0301
1) Start engine and warm it up to normal operating temperature.
2) Turn ignition switch “OFF” and wait at least 10 seconds.
3) Turn ignition switch “ON” again and select “DATA MONITOR”
mode with CONSULT-II.
4) Start engine and let it idle for at least 20 seconds. If 1st trip
DTC is detected, go to “Diagnostic Procedure”, EC-458.
With GST
NHEC0528S0302
Follow the procedure “With CONSULT-II” above.
DTC P1130 SWIRL CONTROL VALVE CONTROL SOLENOID VALVE
DTC Confirmation Procedure (Cont’d)
EC-456
Loading ...
Loading ...
Loading ...