Loading ...
Loading ...
Loading ...
DTC Work Support Mode
NHEC0034S0802
Test mode Test item Condition Reference page
EVAP SYSTEM
EVAP SML LEAK P0440/P1440
Refer to corresponding
trouble diagnosis for
DTC.
EC-362, 531
PURG VOL CN/V P1444 EC-533
PURGE FLOW P1447 EC-553
VC CUT/V BP/V P1491 EC-582
HO2S1
HO2S1 (B1) P0130 EC-192
HO2S1 (B1) P0131 EC-202
HO2S1 (B1) P0132 EC-210
HO2S1 (B1) P0133 EC-218
HO2S1 (B2) P0150 EC-192
HO2S1 (B2) P0151 EC-202
HO2S1 (B2) P0152 EC-210
HO2S1 (B2) P0153 EC-218
HO2S2
HO2S2 (B1) P0137 EC-246
HO2S2 (B1) P0138 EC-256
HO2S2 (B1) P0139 EC-266
HO2S2 (B2) P0157 EC-246
HO2S2 (B2) P0158 EC-256
HO2S2 (B2) P0159 EC-266
SEF705Y
SEF707X
REAL TIME DIAGNOSIS IN DATA MONITOR MODE
(RECORDING VEHICLE DATA)
NHEC0034S10
CONSULT-II has two kinds of triggers and they can be selected by
touching “SETTING” in “DATA MONITOR” mode.
1) “AUTO TRIG” (Automatic trigger):
I The malfunction will be identified on the CONSULT-II screen in
real time.
In other words, DTC/1st trip DTC and malfunction item will be
displayed if the malfunction is detected by ECM.
At the moment a malfunction is detected by ECM, “MONITOR”
in “DATA MONITOR” screen is changed to “Recording Data ...
xx%” as shown at left, and the data after the malfunction detec-
tion is recorded. Then when the percentage reached 100%,
“REAL-TIME DIAG” screen is displayed. If “STOP” is touched
on the screen during “ Recording Data ... xx%”, “REAL-TIME
DIAG” screen is also displayed.
The recording time after the malfunction detection and the
recording speed can be changed by “TRIGGER POINT” and
“Recording Speed”. Refer to CONSULT-II OPERATION
MANUAL.
2) “MANU TRIG” (Manual trigger):
I DTC/1st trip DTC and malfunction item will not be displayed
GI
MA
EM
LC
FE
AT
AX
SU
BR
ST
RS
BT
HA
SC
EL
IDX
ON BOARD DIAGNOSTIC SYSTEM DESCRIPTION
CONSULT-II (Cont’d)
EC-101
Loading ...
Loading ...
Loading ...