Loading ...
Loading ...
Loading ...
SEF013Y
PROCEDURE FOR MALFUNCTION A
NHEC0200S01
With CONSULT-II
NHEC0200S0101
1) Turn ignition switch “ON”.
2) Select “DATA MONITOR” mode with CONSULT-II.
3) Crank engine for at least 2 seconds.
4) If 1st trip DTC is detected, go to “Diagnostic Procedure”,
EC-354.
With GST
NHEC0200S0102
Follow the procedure “With CONSULT-II” above.
SEF058Y
PROCEDURE FOR MALFUNCTION B AND C
NHEC0200S02
With CONSULT-II
NHEC0200S0201
1) Turn ignition switch “ON”.
2) Select “DATA MONITOR” mode with CONSULT-II.
3) Start engine and run it for at least 2 seconds at idle speed.
4) If 1st trip DTC is detected, go to “Diagnostic Procedure”,
EC-354.
With GST
NHEC0200S0202
Follow the procedure “With CONSULT-II” above.
DTC P0340 CAMSHAFT POSITION SENSOR (CMPS) (PHASE)
DTC Confirmation Procedure (Cont’d)
EC-352
Loading ...
Loading ...
Loading ...