Loading ...
Loading ...
Loading ...
7 ADJUST THROTTLE POSITION SWITCH
Check the following items. Refer to “Basic Inspection”, EC-109.
MTBL0595
Is it possible to adjust closed throttle position switch?
YesorNo
Yes (With CONSULT-II) © GO TO 8.
Yes (Without CONSULT-
II)
© GO TO 9.
No © Replace throttle position switch.
8 CHECK THROTTLE POSITION SENSOR
With CONSULT-II
1. Start engine and warm it up to normal operating temperature.
2. Stop engine (ignition switch OFF).
3. Turn ignition switch ON.
4. Select “DATA MONITOR” mode with CONSULT-II.
5. Check voltage of “THRTL POS SEN” under the following conditins.
Voltage measurement must be made with throttle position sensor installed in vehicle.
MTBL0230
OK or NG
OK © GO TO 10.
NG © Replace throttle position sensor.
DTC P0510 CLOSED THROTTLE POSITION SWITCH
Diagnostic Procedure (Cont’d)
EC-444
Loading ...
Loading ...
Loading ...