Loading ...
Loading ...
Loading ...
18 REPLACE IACV-AAC VALVE
Replace IACV-AAC valve.
© GO TO 19.
19 PERFORM IDLE AIR VOLUME LEARNING
Refer to “Idle Air Volume Learning”, EC-66.
Which is the result CMPLT or INCMP?
CMPLT or INCMP
CMPLT © GO TO 20.
INCMP © 1. Follow the construction of “Idle Air Volume Learning”.
2. GO TO 16.
20 CHECK TARGET IDLE SPEED AGAIN
With CONSULT-II
1. Start engine and warm it up to normal operating temperature.
2. Select “ENG SPEED” in “DATA MONITOR” mode with CONSULT-II.
3. Check idle speed.
700±50 rpm (in “P” or “N” position)
Without CONSULT-II
1. Start engine and warm it up to normal operating temperature.
2. Check idle speed.
700±50 rpm (in “P” or “N” position)
OK or NG
OK © GO TO 22.
NG © GO TO 21.
21 CHECK ECM FUNCTION
1. Substitute another known-good ECM to check ECM function. (ECM may be the cause of a problem, but this is rarely
the case.)
2. Perform initialization of IVIS (NATS) system and registration of IVIS (NATS) ignition key IDs. Refer to “IVIS (INFINITI
VEHICLE IMMOBILIZER SYSTEM — NATS)”, EC-82.
© GO TO 16.
TROUBLE DIAGNOSIS — BASIC INSPECTION
Basic Inspection (Cont’d)
EC-118
Loading ...
Loading ...
Loading ...