Loading ...
Loading ...
Loading ...
Vacuum Cut Valve and Vacuum Cut Valve Bypass Valve
NHEC0019S04
Refer to EC-582.
Evaporative Emission (EVAP) Canister Purge Volume
Control Solenoid Valve
NHEC0019S05
Refer to EC-377.
Fuel Tank Temperature Sensor
NHEC0019S06
Refer to EC-307.
SEF462UA
Evap Service Port
NHEC0019S07
Positive pressure is delivered to the EVAP system through the
EVAP service port. If fuel vapor leakage in the EVAP system
occurs, use a leak detector to locate the leak.
SEF200U
PEF838U
PEF917U
How to Detect Fuel Vapor Leakage
NHEC0019S08
CAUTION:
I Never use compressed air or a high pressure pump.
I Do not exceed 4.12 kPa (0.042 kg/cm
2
, 0.6 psi) of pressure
in EVAP system.
NOTE:
I Do not start engine.
I Improper installation of EVAP service port adapter to the EVAP
service port may cause a leak.
With CONSULT-II
NHEC0019S0801
1) Attach the EVAP service port adapter securely to the EVAP
service port.
2) Also attach the pressure pump and hose to the EVAP service
port adapter.
3) Turn ignition switch “ON”.
4) Select the “EVAP SYSTEM CLOSE” of “WORK SUPPORT
MODE” with CONSULT-II.
5) Touch “START”. A bar graph (Pressure indicating display) will
appear on the screen.
6) Apply positive pressure to the EVAP system until the pressure
indicator reaches the middle of the bar graph.
7) Remove EVAP service port adapter and hose with pressure
pump.
8) Locate the leak using a leak detector. Refer to “EVAPORATIVE
EMISSION LINE DRAWING”, EC-36.
ENGINE AND EMISSION BASIC CONTROL SYSTEM DESCRIPTION
Evaporative Emission System (Cont’d)
EC-34
Loading ...
Loading ...
Loading ...