Loading ...
Loading ...
Loading ...
Menus
73
V Detail Creation Mode Select the generation method for V Detail.
RGB Nam Uses the V Detail generated from each of the R, G, and B
channels that has the largest amplitude. This increases
resolution sensitivity, but S/N sensitivity may deteriorate.
G Generates V Detail from the G channel.
R+G Generates V Detail from a signal combining R and G.
Y Generates V Detail from the luminance signal.
V Detail Control Mode Sets control for when the Detail H/V Ratio knob is turned.
H/V Moves H Detail and V Detail in the opposite direction in
response to movement of the knob.
V Only Adjusts V Detail only.
Test2 Mode Selects the signal of Test2.
3step Selects a convex test waveform.
10step Selects a step test waveform.
Chroma Filter Sets the band for the chroma component. Full is the same band
as the signal standard, and the band becomes narrower above
that.
720P Acquisition Selects the 720P generation mode. This can only be set when a
camera with a switching function is connected.
Super Sampling This is 720P using the super sampling system.
V-SOP This is 720P using the V-SOP system.
CAM Menu Control – See “To control the CAMERA/BPU menu” (page 78).
CCU Sets the CCU.
Mode GenLock Mode Selects the type of signal using synchronization.
HD This is the HD3 value SYNC.
SD This is BBS.
Bars Character Sets the characters to add to color bars signals.
On Add characters to color bars signals.
Edit Opens the character edit screen.
Chroma Turns OFF the VBS chroma signal.
Off Adds the chroma component to VBS.
Return Settings – See “To set the return input settings” (page 78).
Channel ID Sets the Channel ID display for direct output.
Channel ID ON Turns ON the Channel ID display for direct output.
CCU Menu Control – See “To control the CCU menu” (page 78).
HDFX Performs the HDFX200 settings.
IF Select Selects the cable connecting method.
Triax Triax cable connection
Fiber Fiber cable connection
RCP See “RCP menu items” below.
RCP Assignment Panel No. Selects the target cameras to be controlled by the control panel.
This can only be set when in MCS mode. In addition, all
connected devices must support the RCP assignment function.
Multi Format Sets the video format for each CCU output.
BPU Multi Format Sets the video format for each BPU output.
Config Menu
Item Option Function
Menu Submenu
Loading ...
Loading ...
Loading ...