Loading ...
Loading ...
Loading ...
58
Menus
Skin DTL Allows adjustment of the contour correction level of the set color area. For
example, allows you to make the faces of people appear shiny.
ON Enables the Skin DTL function. Allows up to three channels to be adjusted
separately. This switch enables the Skin DTL function to be turned ON/OFF
simultaneously in accordance with the setting of each channel.
Skin DTL 1 Sets the first channel of Skin DTL. When this channel is enabled, the ON
mark appears on the very left of the tab.
Skin DTL 1 Enables Skin DTL of this channel. Skin DTL cannot be disabled for models
with three channels.
Level This is the contour correction value within the color area that is set with
Phase or Width. Adjusting this in the plus direction makes pictures sharp,
and adjusting this in the minus direction makes pictures soft. For cameras
with an electronic software focus function, this enables softer pictures than
when in the DTL OFF state.
Phase Adjusts the center of the hues of the effective color area of Skin DTL. The
value is almost equivalent to the phase on a vector scope.
Width Sets a range centered on the phase. The value indicates an angle.
Saturation Disables Skin DTL for places with a small degree of color saturation.
Adjusting this in the minus direction also allows Skin DTL to be enabled for
places with less saturation.
Auto Hue 1 This is a function for automatically searching for a hue. Capture the subject
you want to measure in the center of the screen and execute the function.
The phase of this channel is adjusted automatically.
Gate 1 Adds a gate signal to the range of this channel for which Skin DTL is
effective. For the output connector for which the signal can be added, refer
to the manual of the corresponding device.
Natural Skin DTL Enables the Natural Skin DTL function. This can be common to control the
three channels.
Zoom Link Enables the function that changes the correction amount for Skin DTL in
response to the zoom value of the camera.
Skin DTL 2 Sets the second channel of Skin DTL.
Skin DTL 2 Enables Skin DTL of this channel. When this channel is enabled, the ON
mark appears on the very left of the tab.
Level This is the contour correction value within the color area that is set with
Phase or Width. Adjusting this in the plus direction makes pictures sharp,
and adjusting this in the minus direction makes pictures soft. For cameras
with an electronic software focus function, this enables softer pictures than
when in the DTL OFF state.
Phase Adjusts the center of the hues of the effective color area of Skin DTL. The
value is almost equivalent to the phase on a vector scope.
Width Sets a range centered on the phase. The value indicates an angle.
Saturation Disables Skin DTL for places with a small degree of color saturation.
Adjusting this in the minus direction also allows Skin DTL to be enabled for
places with less saturation.
Auto Hue 2 This is a function for automatically searching for a hue. Capture the subject
you want to measure in the center of the screen and execute the function.
The phase of this channel is adjusted automatically.
Gate 2 Adds a gate signal to the range of this channel for which Skin DTL is
effective. For the output connector for which the signal can be added, refer
to the manual of the corresponding device.
Natural Skin DTL Enables the Natural Skin DTL function. This can be common to control the
three channels.
Zoom Link Enables the function that changes the correction amount for Skin DTL in
response to the zoom value of the camera.
Paint menu
Switch Control item Description
Menu Submenu
Loading ...
Loading ...
Loading ...