Loading ...
Loading ...
Loading ...
Menus
59
Skin DTL 3 Sets the third channel of Skin DTL.
Skin DTL 3 Enables Skin DTL of this channel. When this channel is enabled, the ON
mark appears on the very left of the tab.
Level This is the contour correction value within the color area that is set with
Phase or Width. Adjusting this in the plus direction makes pictures sharp,
and adjusting this in the minus direction makes pictures soft. For cameras
with an electronic software focus function, this enables softer pictures than
when in the DTL OFF state.
Phase Adjusts the center of the hues of the effective color area of Skin DTL. The
value is almost equivalent to the phase on a vector scope.
Width Sets a range centered on the phase. The value indicates an angle.
Saturation Disables Skin DTL for places with a small degree of color saturation.
Adjusting this in the minus direction also allows Skin DTL to be enabled for
places with less saturation.
Auto Hue 3 This is a function for automatically searching for a hue. Capture the subject
you want to measure in the center of the screen and execute the function.
The phase of this channel is adjusted automatically.
Gate 3 Adds a gate signal to the range of this channel for which Skin DTL is
effective. For the output connector for which the signal can be added, refer
to the manual of the corresponding device.
Natural Skin DTL Enables the Natural Skin DTL function. This can be common to control the
three channels.
Zoom Link Enables the function that changes the correction amount for Skin DTL in
response to the zoom value of the camera.
Y Limit Disables Skin DTL for low-luminance. Sets the maximum for the Y level to
disable.
Y Limit1 Sets the maximum for the Y level in the first channel of Skin DTL.
Y Limit2 Sets the maximum for the Y level in the second channel of Skin DTL.
Y Limit3 Sets the maximum for the Y level in the third channel of Skin DTL.
Matrix Corrects the color reproduction without changing the white balance.
OFF Enables the matrix function. This switch enables the function to be turned
ON/OFF simultaneously in accordance with individual matrix settings.
User 1/2 Sets the matrix correction factor individually. This is the first page of the
settings. When User Matrix is enabled, the ON mark appears on the very
left of the tab.
User Matrix Enables the User Matrix function.
R-G Corrects the signal of the R channel in accordance with the difference
between the signals of the R channel and G channel.
G-B Corrects the signal of the G channel in accordance with the difference
between the signals of the G channel and B channel.
B-R Corrects the signal of the B channel in accordance with the difference
between the signals of the B channel and R channel.
Adaptive Matrix Enables the Adaptive Matrix function. This can be common to control all
the matrix functions.
User 2/2 Sets the matrix correction factor individually. This is the second page of the
settings. When User Matrix is enabled, the ON mark appears on the very
left of the 1/2 tab.
User Matrix Enables the User Matrix function. This is the same switch as 1/2.
R-B Corrects the signal of the R channel in accordance with the difference
between the signals of the R channel and B channel.
G-R Corrects the signal of the G channel in accordance with the difference
between the signals of the G channel and R channel.
B-G Corrects the signal of the B channel in accordance with the difference
between the signals of the B channel and G channel.
Adaptive Matrix Enables the Adaptive Matrix function. This can be common to control all
the matrix functions.
Paint menu
Switch Control item Description
Menu Submenu
Loading ...
Loading ...
Loading ...