Loading ...
Loading ...
Loading ...
Names and Functions of Parts
13
Menu operation block
Menu operation is performed on the LCD.
Operation is performed by touching the buttons and tabs that
are displayed on the LCD. Use the adjustment knobs to
change numbers and select items.
To change menus, press a menu button or custom button and
then use the buttons in the menu to navigate through the
menu. When you reach the lowest level in the menu, the LED
of the SELECT knob lights. You can display the desired page
by turning the SELECT knob to forward through the menus in
order or by pressing the SELECT button and then accessing
the page from the selection screen.
For details on menu operations, see “Menu Tree” (page 52).
a LCD/touch panel
This is for displaying menus and performing operations.
b SELECT knob
Turning the knob while the LED is lit allows you to select
menus. Pressing in the knob while the LED is lit displays the
menu selection screen to also allow you to switch to the
desired menu.
Pressing in the knob with the Status screen displayed allows
you to display the CUSTOM PAINT menu.
c MENU button
This button is for accessing the menu screen.
d Adjustment knobs (rotary encoders)
These knobs are for adjusting or selecting items in menus.
e CUSTOM PAINT button
This button is for accessing the CUSTOM PAINT menu. You
can set the contents and order of the CUSTOM PAINT menu.
f CUSTOM buttons
These buttons are for directly accessing preset menus. The
CUSTOM1 and CUSTOM2 buttons are available.
RCP-1500/1501 RCP-1530
Loading ...
Loading ...
Loading ...