Loading ...
Loading ...
Loading ...
Settings
39
6 Select the cursor type displayed on the monitor.
[H Cursor] : Press this to light the button and turn the
horizontal cursor ON.
[V Cursor] : Press this to light the button and turn the
vertical cursor ON.
[H/V Cursor] : Press this to light the button and turn the
horizontal and vertical cursors ON.
7 Move the cursors on the monitor to the position you
want to correct.
Turning the adjustment knobs move the cursors on the
monitor. Based on the cursor type selected in step 6, the
horizontal or vertical cursor or both will be assigned to the
adjustment knobs.
8 Press [Enter].
The cursor position is set, and the RPN Correction screen
changes to the following.
9 Turn the adjustment knob on the far right to correct
the defect on the monitor.
Turning the adjustment knob right increases the
brightness level, and turning it left decreases the
brightness level. View the monitor and perform
adjustments until the defects are not visible.
10Press [Save].
The brightness correction value is registered to the control
panel.
To set a different correction value, press
[Delete] to delete
the previous value, and repeat the procedure from step 9.
11Press [Exit].
The brightness correction value is registered to the control
panel.
Setting Security Restrictions
To set the security level
You can restrict the control functions of the control panel if
necessary.
1 Enter engineer mode. (page 51)
2 Set the security level.
The settings for the security level are split into two
screens. Press each of the buttons to display each setting
screen and configure the security level settings.
H Cursor
RPN Correction
H Cursor
500
V Cursor
157ev
Exit
V Cursor
H/V
Cursor
R GBEnter
Engineer Mode
Cursor Indication
H Cursor
RPN Correction
Level
99
Exit
V Cursor
H/V
Cursor
CancelSave
Delete
Engineer Mode
Cursor Indication
H Cursor
RPN Correction
Level
99
Exit
V Cursor
H/V
Cursor
CancelSave
Delete
Engineer Mode
Cursor Indication
Page
Permission
Item
Permission
Code
Change
Security
Exit
ALL
Preset
Engeneer
Mode
Engineer Mode
Loading ...
Loading ...
Loading ...