Loading ...
Loading ...
Loading ...
Settings
37
To change the sensitivity of the adjustment
knobs
You can change the sensitivity of the WHITE, BLACK/FLARE,
DETAIL, assignable, IRIS, and MASTER BLACK adjustment
knobs for when they are used in relative value mode.
1 Enter engineer mode. (page 51)
2 Press the MENU button.
The menu closes and the control panel remains in
engineer mode.
3 Display the RCP Config screen. (page 50)
4 Press [VR Setting].
The VR Setting screen appears.
The following steps differ depending on the type of knob
to be adjusted (WHITE or BLACK/FLARE, DETAIL, IRIS,
or MASTER BLACK).
To adjust the sensitivity of the WHITE and BLACK/
FLARE knobs
1 Press the [White/Blk/Flr] tab.
2 Press the sensitivity (number) you want to set for
each of the adjustment knobs.
To adjust the sensitivity of the DETAIL and
assignable knobs (RCP-1500/1501 only)
1 Press the [Detail/Assign] tab.
2 Press the sensitivity (number) you want to set for
each of the adjustment knobs.
To adjust the sensitivity of the IRIS and MASTER
BLACK knobs
1 Press the [Iris/M.Black] tab.
2 Press the sensitivity (number) you want to set for
each of the adjustment knobs.
To set the screen saver
You can set the screen saver to be activated to protect the
display of the menu operation block when the control panel is
not operated for a certain time.
The screen saver can be turned ON/OFF and the time until it
is activated can be set as necessary.
1 Enter engineer mode. (page 51)
2 Press the MENU button.
The menu closes and the control panel remains in
engineer mode.
3 Display the RCP Config screen. (page 50)
RCP Config
Exit
Customize
Display
/Sound
Mode
VR
Setting
Date
/Time
Option
Key
Network
Infor-
mation
Security
Backup
Engineer Mode
White/
Blk/Flr
Detail/
Assign
1/1
White
VR Setting
Exit
1/2 1/4
1/1
Black/Flare
1/2 1/4
Engineer Mode
Iris/
M.Black
White/
Blk/Flr
Detail/
Assign
1/1
White
VR Setting
Exit
1/2 1/4
1/1
Black/Flare
1/2 1/4
Engineer Mode
Iris/
M.Black
White/
Blk/Flr
Detail/
Assign
1/1
Detail
VR Setting
Exit
1/2 1/4
1/1
Assignable
1/2 1/4
Engineer Mode
Iris/
M.Black
White/
Blk/Flr
Detail/
Assign
Iris/
M.Black
1/1
Iris
VR Setting
Exit
1/2 1/4
1/1
Master Black
1/2 1/4
Engineer Mode
RCP Config
Exit
Customize
Display
/Sound
Mode
VR
Setting
Date
/Time
Option
Key
Network
Infor-
mation
Security
Backup
Engineer Mode
Loading ...
Loading ...
Loading ...