Loading ...
Loading ...
Loading ...
40
Settings
When [Page Permission] is pressed:
The following settings can be configured.
[Full Lock] : Press this to light the button and prohibit
all operations of the control panel.
[View Mode] : Press this to light the button and prohibit
all operations of the control panel except for viewing
data.
[Full Paint] : Under the default settings, all operations
of the control panel are prohibited except for
custom paint menu operations. Press this to light
the button and permit all other operations of the
control panel.
When
[Item Permission] is pressed:
The following settings can be configured.
[Auto Setup Enable] : Press this to light the button and
add the {Auto Setup} button to the Maintenance
menu. The APR function of the control panel is
permitted.
[Ref File Enable] : Press this to light the button and
permit the setting of the reference files of the
control panel.
[Lens File Enable] : Press this to light the button and
permit the setting of the lens files of the control
panel.
[OHB File Enable] : Press this to light the button and
permit the setting of the OHB files of the control
panel.
[Crop Enable] : Press this to light the button and
permit the setting of 16:9 t 4:3 Crop of the control
panel.
[Knee Max Enable] : Press this to light the button and
permit the knee max function.
[3D Menu Enable] : Press this to light the button and
permit 3D System and CCU 3D Monitor
configuration of the control panel. Light [3D Menu
Enable] when using the HDFA-200 and configuring
the 3D system.
[Custom Mtx Enable] : Press this to light the button
and the Custom Matrix menu is added to the FILE
menu. You can save a Custom Preset Matrix file,
and save or readout the file from a Memory Stick.
3 Press [Exit] when the settings are finished.
The Security screen reappears.
4 Press [Engineer Mode] to cancel engineer mode.
To protect operations with a security code
To prevent unwanted operations, you can protect operation of
the control panel with a security code.
To enable security code protection
Under the default settings, the security code is disabled. Use
the following procedure to enable the security code.
1 For RCP-1500/1501, turn on the control panel while
holding down the PARA, MASTER, and CUSTOM
PAINT buttons.
For RCP-1530, turn on the control panel while holding
down the PANEL ACTIVE, IRIS/MB ACTIVE, and PAINT
buttons.
RCP-1500/1501
Page Permission
Exit
Full Lock
View
Mode
Full Paint
Engineer Mode
Engineer ModeEngineer Mode
Auto Setup
Enable
Holding down
Loading ...
Loading ...
Loading ...