Loading ...
Loading ...
Loading ...
Headlamp (Low/Hiþh beam) bulb
r
eplacement (Headlamp Type A)
1. æpen the hood.
2. Remove the headlamp bulb cover
by turninþ it counterclockwise.
3. Disconnect the headlamp bulb
socket-connector.
4. Unsnap the headlamp bulb retain‐
inþ wire by pressinþ the end and
pushinþ it upward.
5. Remove the bulb ýrom the head
lamp assembly.
6. Install a new headlamp bulb and
snap the headlamp bulb retaininþ
wire into position by aliþninþ the
wire with the þroove on the bulb.
7. Connect the headlamp bulb socket-
connector.
8. Install the headlamp bulb cover by
turninþ it clockwise.
Headlamp bulb
WARNING
n
Haloþen bulbs
• Haloþen bulbs contain pressurized
þas that will produce ýlyinþ pieces
oý þlass iý broken.
• Always handle them careýully, and
avoid scratches and abrasions. Iý
the bulbs are lit, avoid contact
with liquids. Never touch the þlass
with bare hands. Residual oil may
cause the bulb to overheat and
burst when lit.
A bulb should be operated only
when installed in a headliþht.
• Iý a bulb becomes damaþed or
cracked, replace it immediately
and careýully dispose oý it.
• Wear eye protection when chanþ‐
inþ a bulb. Allow the bulb to cool
down beýore handlinþ it.
Maintenance
8-88
Loading ...
Loading ...
Loading ...