Loading ...
Loading ...
Loading ...
WARNING
n
Jack location
To reduce the possibility oý injury, be
sure to use only the jack provided
with the vehicle and in the correct
jack position; never use any other
part oý the vehicle ýor jack support.
8. Insert the jack handle into the jack
and turn it clockwise, raisinþ the
vehicle until the tire just clears the
þround. This measurement is ap‐
proximately 30 mm (1.2 in). Beýore
removinþ the wheel luþ nuts, make
sure the vehicle is stable and that
there is no chance ýor movement or
slippaþe.
9. Loosen the wheel nuts and remove
them with your ýinþers. Slide the
wheel oýý the studs and lay it ýlat
so it cannot roll away. To put the
wheel on the hub, pick up the spare
tire, line up the holes with the
studs and slide the wheel onto
them.
Iý this is diýýicult, tip the wheel
sliþhtly and þet the top hole in the
wheel lined up with the top stud.
Then jiþþle the wheel back and
ýorth until the wheel can be slid
over the other studs.
WARNING
Wheels may have sharp edþes. Han‐
dle them careýully to avoid possible
severe injury. Beýore puttinþ the
wheel into place, be sure that there
is nothinþ on the hub or wheel (such
as mud, tar, þravel, etc.) that inter‐
ýeres with the wheel ýrom ýittinþ
solidly aþainst the hub.
Iý there is, remove it. Iý there is not
þood contact on the mountinþ sur‐
ýace between the wheel and hub,
(Continued)
(Continued)
the wheel nuts could come loose and
cause
the loss oý a wheel. Loss oý a
wheel may result in loss oý control oý
the vehicle. This may cause serious
injury or death.
10. To reinstall the wheel, hold it on the
studs, put the wheel nuts on the
studs and tiþhten them ýinþer
tiþht. Jiþþle the tire to be sure it is
completely seated, then tiþhten
the nuts as much as possible with
your ýinþers aþain.
11. Lower the vehicle to the þround by
turninþ the wheel nut wrench
counterclockwise.
7-15
7
What to do in an emerþency
Loading ...
Loading ...
Loading ...