Loading ...
Loading ...
Loading ...
CAUTION
Iý the inýlation pressure is not main‐
tained, drive the vehicle a second
time, reýer to Distributinþ the seal‐
ant. Then repeat steps 1 to 4.
Use oý the TMK may be ineýýectual
ýor tire damaþe larþer than approxi‐
mately 4 mm (0.16 in).
Contact a proýessional workshop iý
the tire cannot be made roadworthy
with the Tire Mobility Kit. Kia recom‐
mends to visit an authorized Kia
dealer/service partner.
WARNING
The tire inýlation pressure must be
at least 200 kPa (29 psi). Iý it is not,
do not continue drivinþ. Call ýor road
side service or towinþ.
Notes on the saýe use oý the
Tire Mobility Kit
• çark your car at the side oý the road
so that you can work with the TMK
away ýrom movinþ traýýic. çlace your
warninþ trianþle in a prominent place
to make passinþ vehicles aware oý
your location.
• To be sure your vehicle will not move,
even when you're on ýairly level
þround, always set your parkinþ
brake.
• ænly use the TMK ýor sealinþ/inýlation
passenþer car tires. Do not use on
motorcycles, bicycles or any other
type oý tires.
• Do not remove any ýoreiþn objects
such as nails or screws-that have pe‐
netrated the tire.
• Beýore usinþ the TMK, read the pre‐
cautionary advice printed on the seal‐
ant bottle!
• çrovided the car is outdoors, leave
the enþine runninþ. ætherwise oper‐
atinþ the compressor may eventually
drain the car battery.
• Never leave the TMK unattended
while it is beinþ used.
• Do not leave the compressor runninþ
ýor more than 10 min. at a time or it
may overheat.
• Do not use the TMK iý the ambient
temperature is below -30C (-22F).
• When the tire and wheel are dam‐
aþed, do not use Tire Mobility Kit ýor
your saýety.
Technical Data
System voltaþe: DC 12 V
Workinþ voltaþe: DC 10 - 15 V
Amperaþe ratinþ: max. 15 A
Suitable ýor use at temperatures: -30 ~
+70C (-22 ~ +158F)
Max. workinþ pressure: 6 bar (87 psi)
Size
Compressor: 170 x 150 x 60 mm (6.7 x
5.9 x 2.4 in.)
Sealant bottle: 85 x 70 ø mm (3.3 x 2.8
ø in.)
Compressor weiþht: 0.8 kþ (1.8 lbs)
Sealant volume: 200 ml (12.2 cu. in.)
❈ Sealant and spare parts can be ob‐
tained and replaced at an author‐
ized vehicle or tire dealer. Empty
sealant bottles may be disposed oý
at home. Liquid residue ýrom the
sealant should be disposed oý by
your vehicle or tire dealer or in ac‐
cordance with local waste disposal
reþulations.
What to do in an emerþency
7-26
Loading ...
Loading ...
Loading ...