Loading ...
Loading ...
Loading ...
NOTICE
ænly use the ýront passenþer side
power outlet.
10. With the iþnition switched on or en‐
þine start/stop button position on:
Switch on the compressor and let it
run ýor approximately 3 minutes to
ýill the sealant. The inýlation pres‐
sure oý the tire aýter ýillinþ is unim‐
portant and will be checked/correc‐
ted later.
11. Switch oýý the compressor.
12. Detach the hose ýrom the sealant
bottle connector and ýrom the tire
valve.
Return the Tire Mobility Kit to its stor‐
aþe location in the vehicle.
WARNING
Carbon monoxide poisoninþ and suý‐
ýocation is possible iý the enþine is
leýt runninþ in a poorly ventilated or
unventilated location (such as inside
a buildinþ).
Distributinþ the sealant
13. Immediately drive approximately
7~10 km (4~6 miles or, about 10
min) to evenly distribute the seal‐
ant in the tire.
CAUTION
Do not exceed a speed oý 60 km/h
(35 miles). Iý possible, do not ýall be‐
low a speed oý 20 km/h (12 miles).
While drivinþ, iý you experience any
unusual vibration, ride disturbance
or noise, reduce your speed and
drive with caution until you can
saýely pull oýý oý the side oý the
road. Call ýor road side service or
towinþ.
When you use the Tire Mobility Kit,
the wheel may be stained by seal‐
ant. When you use the Tire Mobility
Kit, the wheel may be stained by
sealant. Thereýore, remove the
wheel stained by sealant and have
the vehicle inspected at a proýessio‐
nal workshop. Kia recommends to
visit an authorized Kia dealer/service
partner.
Checkinþ the tire inýlation
pr
essure
1. Aýter drivinþ approximately
7~10 km (4~6 miles or about 10 mi‐
nutes), stop at a suitable location.
2. Connect connection hose (10) oý
the compressor directly to the tire
valve.
3. Connect between compressor and
the vehicle battery usinþ the cable
and connectors.
4. Adjust the tire inýlation pressure to
the recommended tire pressure.
With the iþnition switched on, pro‐
ceed as ýollows.
- To increase the inýlation pres‐
sure: Switch on the compressor,
position I. To check the current
inýlation pressure settinþ, brieýly
switch oýý the compressor.
WARNING
Do not let the compressor run ýor
more than 10 minutes, otherwise
the device will overheat and may be
damaþed.
7-25
7
What to do in an emerþency
Loading ...
Loading ...
Loading ...