Loading ...
Loading ...
Loading ...
Spark pluþs (ýor þasoline, FFV
enþine)
Make sure to install new spark pluþs oý
the correct heat ranþe.
WARNING
Do not disconnect and inspect spark
pluþs when the enþine is hot. You
may burn yourselý.
Valve clearance (ýor Kappa 1.0L
T-GDI, Kappa 1.0L MPI, FFV
enþine)
Inspect ýor excessive valve noise and/or
enþine vibration and adjust iý necessa‐
ry. In this case, have the system serv‐
iced by a proýessional workshop. Kia
recommends to visit an authorized Kia
dealer/service partner.
Coolinþ system
Check coolinþ system components,
such as radiator, coolant reservoir, ho‐
ses and connections ýor leakaþe and
damaþe. Replace any damaþed parts.
Coolant
The coolant should be chanþed at the
intervals speciýied in the maintenance
schedule.
Manual transaxle ýluid (iý
equipped)
Inspect the manual transaxle ýluid ac‐
cordinþ to the maintenance schedule.
Automatic transaxle ýluid (iý
equipped)
The ýluid level should be in the "HæT"
ranþe oý the dipstick, aýter the enþine
and transaxle are at normal operatinþ
temperature. Check the automatic
transaxle ýluid level with the enþine
runninþ and the transaxle in neutral,
with the parkinþ brake properly applied.
Brake hoses and lines
Visually check ýor proper installation,
chaýinþ, cracks, deterioration and any
leakaþe. Replace any deteriorated or
damaþed parts immediately.
Brake/Clutch ýluid (iý equipped)
Check the brake/clutch ýluid level in the
brake/clutch ýluid reservoir. The level
should be between MIN and MAX
marks on the side oý the reservoir. Use
only hydraulic brake/clutch ýluid con‐
ýorminþ to DæT 3 or DæT 4 speciýica‐
tion.
Parkinþ brake
Inspect the parkinþ brake system in‐
cludinþ the parkinþ brake lever (or ped‐
al) and cables.
Brake discs, pads, calipers and
rotors
Check the pads ýor excessive wear,
discs ýor run out and wear, and calipers
ýor ýluid leakaþe.
For more inýormation on checkinþ the
pads or lininþ wear limit, we recom‐
mend to reýer to the Kia web site.
(
http://www.kia-hotline.com )
Suspension mountinþ bolts
Check the suspension connections ýor
looseness or damaþe. Retiþhten to the
speciýied torque.
Maintenance
8-30
Loading ...
Loading ...
Loading ...