Loading ...
Loading ...
Loading ...
5 /1X : For a sinþle wipinþ cycle,
move the lever to this po‐
sition and release it. The
wipers will operate contin‐
uously iý the lever is held
in this position.
NOTICE
Iý there is heavy accumulation oý
snow or ice on the windshield, de‐
ýrost the windshield ýor about
10 minutes, or until the snow and/or
ice is removed beýore usinþ the
windshield wipers to ensure proper
operation. Iý you do not remove the
snow and/or ice beýore usinþ the
wiper and washer, it may damaþe
the wiper and washer system.
Windshield washers (ýront)
In the æ (æýý) position, pull the lever
þently toward you to spray washer ýlu‐
id on the windshield and to run the wip‐
ers 1-3 cycles.
Use this ýunction when the windshield
is dirty.
The spray and wiper operation will con‐
tinue until you release the lever.
Iý the washer does not work, check the
washer ýluid level. Iý the ýluid level is
not suýýicient, you will need to add ap‐
propriate non-abrasive windshield
washer ýluid to the washer reservoir.
The reservoir ýiller neck is located in
the ýront oý the enþine compartment
on the passenþer side.
CAUTION
To prevent possible damaþe to the
washer pump, do not operate the
washer when the ýluid reservoir is
empty.
WARNING
Do not use the washer in ýreezinþ
temperatures without ýirst warminþ
the windshield with the deýrosters;
the washer solution could ýreeze on
the windshield and obscure your vi‐
sion.
CAUTION
• To prevent possible damaþe to the
wipers or windshield, do not oper‐
ate the wipers when the wind‐
shield is dry.
• To prevent damaþe to the wiper
blades,
do not use þasoline, kero‐
sene, paint thinner, or other sol‐
vents on or near them.
(Continued)
Features oý your vehicle
4-80
Loading ...
Loading ...
Loading ...