Loading ...
Loading ...
Loading ...
#
If necessary, slide head restraint 1 upwards
(/ page 103).
#
Install the LATCH-type (ISOFIX) child restraint
system with Top Tether. Comply with the
child restraint system manufacturer's instal‐
lation instructions when doing so.
#
Guide Top Tether belt 5 under head
restraint 1 between the two head restraint
bars.
#
If cargo compartment cover 3 is installed,
guide Top Tether belt 5 downwards
between cargo compartment cover 3 and
seat backrest 2.
#
Hook Top Tether hook 6 of Top Tether belt
5 into Top Tether anchorage 4 without
twisting.
#
Tension Top Tether belt 5. Comply with the
child restraint system manufacturer's instal‐
lation instructions when doing so.
#
If necessary, slide head restraint 1 down‐
wards (/ page 103). Make sure that you do
not interfere with the correct routing of Top
Tether belt 5.
Securing the child restraint system with the
seat belt
Securing the child restraint system with the
seat belt on the rear seat
&
WARNING Risk of injury if the rear
bench seat/rear seat and seat backrest
are not engaged
If the rear bench seat/rear seat and seat
backrest are not engaged they could fold for‐
wards, e.g. when braking suddenly or in the
event of an accident.
R
If this is the case, the vehicle occupant
would be forced into the seat belt by the
rear bench seat/rear seat or by the seat
backrest. The seat belt cannot protect as
intended and could result in additional
injury.
R
Objects or loads in the trunk/cargo com‐
partment cannot be restrained by the
seat backrest.
Occupant safety
61
Loading ...
Loading ...
Loading ...