Loading ...
Loading ...
Loading ...
the prevailing light, visibility and traffic condi‐
tions.
%
Adaptive Highbeam Assist is only available in
vehicles with LED high performance head‐
lamps.
The Adaptive Highbeam Assist automatically
switches between the following types of light:
R
Low-beam headlamps
R
High-beam headlamps
At speeds greater than 19 mph (30 km/h):
R
If no other road users are detected, the high
beam will be switched on automatically.
The high beam switches off automatically in the
following cases:
R
At speeds below 16 mph (25 km/h).
R
If other road users are detected.
R
If street lighting is sufficient.
At speeds greater than approximately 31 mph
(50 km/h):
R
The headlamp range of the low beam is regu‐
lated automatically based on the distance to
other road users.
The system's optical sensor is located behind
the windshield near the overhead control panel.
Switching Adaptive Highbeam Assist on/off
#
To switch on: turn the light switch to the
à position.
#
Switch on the high beam using the combina‐
tion switch.
When the high beam is switched on automat‐
ically in the dark, the _ indicator lamp on
the multifunction display comes on.
#
To switch off: switch off the high beam
using the combination switch.
Switching the daytime running lamps on/off
Multimedia system:
4
©
5
Settings
5
Light
5
Daytime Run. Lights
#
Activate D or deactivate E the func‐
tion.
Setting the exterior lighting switch-off delay
time
Requirements:
R
The light switch is in the à position.
Light and visibility
139
Loading ...
Loading ...
Loading ...