Loading ...
Loading ...
Loading ...
&
WARNING ‑ Risk of fire and injury from
antifreeze
If antifreeze comes into contact with hot
component parts in the engine compart‐
ment, it may ignite.
#
Allow the engine to cool down before
adding antifreeze.
#
Make sure that no antifreeze spills out
next to the filler opening.
#
Thoroughly clean off any antifreeze
from component parts before starting
the vehicle.
*
NOTE Damage caused by incorrect cool‐
ant
#
Only add coolant that has been pre‐
mixed with the required antifreeze pro‐
tection.
Information on coolant is available at the fol‐
lowing locations:
R
In the Mercedes-Benz Specification for
Operating Fluids 310.1
-
At http://bevo.mercedes-benz.com
-
In the Mercedes-Benz BeVo app
R
At a qualified specialist workshop
*
NOTE Overheating at high outside tem‐
peratures
If an inappropriate coolant is used, the
engine cooling system is not sufficiently pro‐
tected against overheating and corrosion at
high outside temperatures.
#
Always use coolant approved by
Mercedes-Benz.
#
Observe the instructions in the
Mercedes-Benz Specifications for Oper‐
ating Fluids 310.1.
Have the coolant regularly replaced at a qualified
specialist workshop.
The proportion of corrosion inhibitor/antifreeze
concentrate in the engine cooling system should
be:
R
a minimum of 50% (antifreeze protection
down to approximately -35 °F (-37 °C))
R
a maximum of 55% (antifreeze protection
down to -49 °F (-45 °C))
Coolant capacity
Capacity
ModelCapacity
GLE 350 4MATIC 13.7 US qt
(13.0 liters)
GLE 450 4MATIC 20.0 US qt
(18.9 liters)
GLE 580 4MATIC 16.6 US qt
(15.7 liters)
Notes on windshield washer fluid
Observe the notes on operating fluids
(/ page 529).
534
Technical data
Loading ...
Loading ...
Loading ...