Loading ...
Loading ...
Loading ...
24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Configure System Information User Manual98
access is allowed. For example, if the management station IP address and management
station IP mask parameters are 192.168.1.0/255.255.255.0, any client with an IP address
from one 192.168.1.0 through 192.168.1.255 (inclusive) is allowed access. To allow
access from only one station, use a management station IP mask value of
255.255.255.255, and use that machine’s IP address for client address.
9. In
the Community
String field, specify a community name.
10. From the Access
Mode menu, select the access level for this community, which is either
Read/Write or Read Only.
11. From the Status
menu, select to enable or disable the community.
If you select Enable, the community name must be unique among all valid community
names or the set requests are rejected. If you select Disable, the community name
becomes invalid.
12. Click the Add
button.
The selected community is added.
Modify an existing SNMP community
To modify an existing SNMP community:
1. Connect your
computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ether
net cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 18 or Access the switch off-network on page 27.
The Local Device Login page displays.
If you did not yet register the switch
with your NETGEAR account, the Register to unlock
all features page displays. For more information, see
Register the switch on page 31.
4. Enter one of the following passwords:
• After registration, enter the local device password.
By default, the local device password is
password.
Y
ou must change this password
at initial login.
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the local browser UI on
page 30.
5. Click the Login
button.
The System Information page displays.
Loading ...
Loading ...
Loading ...