GS724TPP-100NAS User Manual

Loading ...

24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports

Monitor the System User Manual359

4. Enter one of the following passwords:

• After initial login, enter your local device password.

By default, the local device password is password.

ou must change this password

at initial login.

• If you previously managed the switch through the Insight app or Cloud portal, enter

the Insight network password for the last Insight network location.

For information about the credentials, see

Credentials for the local browser UI on

page 30.

5. Click the Login

button.

The System Information page displays.

6. Select Monitoring >

Ports > Port Statistics.

The Port Statistics page displays.

7. Select the check box in the heading of the table.

8. Click the Clear

button.

All counters are reset to 0.

Reset the counters for one or more interfaces

To reset the counters for one or more interfaces:

1. Connect your

computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or

connect directly to a switch that is off-network using an Ether

net cable.

2. Launch a web browser.

3. In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see

Access the switch on-network and

connected to the Internet on page 18 or Access the switch off-network on page 27.

The Local Device Login page displays.

If you did not yet register the switch with your NETGEAR account, the

all features page displays. For more information, see