Loading ...
Loading ...
Loading ...
24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Monitor the System User Manual380
If you did not yet register the switch with your NETGEAR account, the Register to unlock
all features page displays. For more information, see
Register the switch on page 31.
4. Enter one of the following passwords:
• After initial login, enter your local device password.
By default, the local device password is password
.
You must change this password
at initial login.
• If you previously managed the switch through the Insight app or
Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the local browser UI on
page 30.
5. Click the Login
button.
The System Information page displays.
6. Select Monitoring > Mirroring
> Port Mirroring.
7. Select an Admin Mode radio button:
• Disable. Port mirroring is disabled. This is the default setting.
• Enabled
. Port mirroring is enabled.
8. From
the Destination Port menu,
select the physical destination port to which port traffic
must be copied.
You can configure one destination port only. The port functions as a probe port and
receives traffic from all configured source ports. If no port is configured, None is
displayed.
The default is None.
9. Click the Apply
button.
Your settings are saved.
In the Source Interface Configuration section, perform the following steps.
Loading ...
Loading ...
Loading ...