Loading ...
Loading ...
Loading ...
24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Get Started User Manual37
Change the management mode of the
switch
By default, the management mode on the switch is Directly Connect to Web Browser
Interface (which is the same as the local browser UI). You can also change the management
mode to NETGEAR Insight Mobile App and Insight Cloud Portal.
About changing the management mode
The following applies to changing the management mode:
• Changing to the NETGEAR Insight Mobile App and Insight Cloud Portal mode.
- The first time that you enable this mode, the switch is reset to its factory default
settings so that you can create the switch configuration and network topology using
the Insight app or the Insight Cloud portal.
- If you previously added the switch to a network location on the Insight app or Insight
Cloud portal, all Insight-manageable device settings are returned to the last
configuration saved on the cloud server
, including the switch l
ocal device password
(that is, the password is reset to the Insight network location password).
- If
you use the Insight app or the Insight Cloud portal, you can temporarily change the
management
mode of the switch back to Directly Connect to Web Browser Interface.
You can then access the local browser UI for settings that are not
Insight-manageable, for complex tasks such as integrating with an existing network of
devices that are not managed through Insight, and for debugging purposes. When
you are done, you can change the management mode back to NETGEAR Insight
Mobile App and Insight Cloud Portal.
• Changing back to Directly Connect to W
eb Browser Interface mode
.
- The NETGEAR Insight Mobile App and Insight Cloud Portal managem
ent mode is
disabled and the current Insight-manageable device settings are saved to the cloud
server.
- Any changes that you make using the Directly Connect to Web Bro
wser Interface
management mode are not saved to the cloud server.
Change the management mode to NETGEAR Insight
Mobile App and Insight Cloud Portal
To change the management mode of the switch to NETGEAR Insight Mobile App and
Insight Cloud portal:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ether
net cable.
2. Launch a web browser.
Loading ...
Loading ...
Loading ...