Loading ...
Loading ...
Loading ...
24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Configure System Information User Manual89
7. Select one or more interfaces by taking one of the following actions:
• To configure a single interface, select the check box associated with the port, or type
the port number (for example, g1) in the Go T
o Interface field and click the Go
button.
• To configure multiple interfaces with the same settings, select the check box
associated with each interface.
• To configure all interfaces with
the same settings, select the check box in the heading
row.
8. From the EEE mode
menu, select Enable or Disable.
The default is Disable.
9. Click the Apply
button.
Your settings are saved.
Use the Device View
For device view information, see
Use the Device View of the local browser UI on page 40.
Configure Power over Ethernet
You can configure the global Power over Ethernet (PoE) configuration settings and the PoE
settings for each port.
PoE concepts
The following table shows the PoE+ capacity for each model.
Table 14. PoE capacities
Model Maximum Power Budget
Across All Active PoE+ Ports
Maximum PoE Power
Per Individual Port
GS724TPv2 190W
30W PoE+ (IEEE 802.3at)
GS724TPP 380W
By default, supplied power is prioritized in ascending port order, up to the total power budget
of the device. If the power requirements for the attached devices exceed the total power
budget of the switch, the power to the device on the highest-numbered PoE+ port is disabled
to make sure that the devices connected to the higher-priority, lower-numbered PoE+ ports
are supported first.
Loading ...
Loading ...
Loading ...