Loading ...
Loading ...
Loading ...
24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Configure System Information User Manual55
7. To refresh the page, click the Refresh button.
The following table describes the nonconfigurable temperature and fan status information.
Table 5. Fan status
Field Description
FAN The fan index used to identify the fan for the switch.
Description The description of the fan temperature sensor.
Type Specifies whether the fan module is fixed or removable.
Speed The fan speed.
Duty level (%) The duty level of the fan.
State Specifies whether the fan is operational.
View the software versions
You can view the software versions that are running on the switch.
To view the software versions:
1. Connect your computer
to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch
a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 18 or Access the switch off-network on page 27.
The Local Device Login page displays.
If you did not yet register the switch with your NETGEAR account, the Register
to unlock
all features page displays. For more information, see
Register the switch on page 31.
4. Enter one of the following passwords:
• After initial login, enter your local device password.
By default, the local device password is password
.
You must change this password
at initial login.
Loading ...
Loading ...
Loading ...