Loading ...
Loading ...
Loading ...
24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Monitor the System User Manual381
10. Select whether to display physical interfaces, LAGs, the CPU, or al by clicking one of the
following links above the table heading:
•1 (the
unit ID of the switch). Only physical interfaces are displayed. This is the default
setting.
•
LAG. Only LAGs are displayed.
• CPU. Only the CPU is displayed.
• All.
The physical interfaces, LAGs, and CPU are displayed.
1
1. Select one or more interfaces by taking one of the following actions:
• To select a single interface, select the check box associated with the port, or type the
port number in the Go T
o Interface field and click the Go button.
• To select multiple interfaces, select the check box associated with each interface.
T
raffic from the selected ports will be sent to the destination port.
12. From the Direction
menu, specify the direction of the traffic that must be mirrored from the
selected source ports:
• None. No traf
fic direction is selected.
This is the default setting.
• Tx and Rx. Monitors both transmitted and received packets.
•Rx. Monitors received (ingress) packets only
.
•T
x. Monitors transmitted (egress) packets only.
13. Click the Apply
button.
Your settings are saved.
The Status field indicates the interface status. The destination port
is listed as Probe. The
source ports are listed as Mirrored.
Loading ...
Loading ...
Loading ...