Loading ...
Loading ...
Loading ...
24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Configure Switching User Manual198
• VLAN ID. From the Search menu, select VLAN ID, and enter the VLAN ID, for
example, 100. Then click the Go button.
• Interface. From the Search menu, select Interface, and enter the interface ID using
the respective interface naming convention (for example, g1 or l1). Then click the Go
button.
8. To refresh the page with the latest information about the switch, click the Refresh button.
9. To clear all dynamic MAC address entries in the table, click the Clear
button.
The following table describes the nonconfigurable information on the page.
Table 39. MAC address table information
Field Description
Total MAC Address The number of MAC addresses learned or configured.
VLAN ID The VLAN ID associated with the MAC address.
MAC Address The unicast MAC address for which the switch holds forwarding and/or filtering
information.
The format is a 6-byte MAC address that is separated by colons, for
example 01:23:45:67:89:AB.
Interface The interface upon which this address was learned.
Status The status of this entry
. The meanings of the values are as follows:
Set the dynamic address aging interval
You can set the address aging interval for the forwarding database. This is the time-out
period in seconds for aging out dynamically learned forwarding information.
To set the address aging interval:
1. Connect your computer
to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch
a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 18 or Access the switch off-network on page 27.
The Local Device Login page displays.
If you did not yet register the switch with
your NETGEAR account, the Register to unlock
all features page displays. For more information, see
Register the switch on page 31.
• Static. The value of the corresponding instance was added by the system or a user
and cannot be relearned.
• Learned. The value of the corresponding instance was learned, and is being used.
• Management. The value of the corresponding instance is also the value of an
existing instance of dot1dStaticAddress.
Loading ...
Loading ...
Loading ...