Loading ...
Loading ...
Loading ...
24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Specifications and Default Settings User Manual428
Switch default settings
The following table describes the switch default settings.
Table 67. Switch default settings
Feature Default
IP address 192.168.0.239
Subnet mask 255.255.255.0
Default gateway 192.168.0.254
Protocol DHCP
Management VLAN ID 1
IPv6 admin mode Enabled
IPv6 address auto configuration Disabled
DHCPv6 Disabled
Minimum length for the local device password Eight characters
SNTP client Disabled
Global logging Enabled
Memory logging Enabled (Severity level: informational and above)
Persistent (flash) logging Disabled
DNS Enabled (No servers configured)
SNMP traps Enabled
Automatic saving to the startup configuration Enabled, but you must click the Apply button to save
changes that you make on a page.
TACACS+ No server configured
RADIUS No server configured
Denial of service protection Disabled
Dot1x authentication (IEEE 802.1X) Disabled
MAC-based port security All ports are unlocked
Access control lists (ACL) Not configured
Protected ports None
Advertised port speed Maximum capacity
Broadcast storm control Disabled
Loading ...
Loading ...
Loading ...