Loading ...
Loading ...
Loading ...
24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Configure Switching User Manual142
6. Select Switching > VLAN > Basic > VLAN Configuration.
7. In the VLAN ID field, specify the VLAN identifier for the new VLAN.
The range of the VLAN ID can be from 2 to 4093, excluding 4088. (The default VLANs
are 1 and 4088).
8. In the VLAN Name
field, specify a name for the VLAN.
The VLAN name can be up to 32 alphanumeric characters long, including blanks. The
default is blank. VLAN ID 1 always uses the name Default.
9. The VLAN Type
field displays the type of the VLAN that you are configuring.
The VLAN name can be up to 32 alphanumeric characters long, including blanks. You
cannot change the names of the default VLANs (that is, the VLAN
s with ID 1 and 4088).
10. The VLAN Type field displays the type of the VLAN that you are configuring.
You cannot change the type of the default VLANs (that is, the VLANs with ID
1 and 4088).
When you create a VLAN using this page, its type is always static. A VLAN that is created
by the Generic VLAN Registration Protocol (GVRP) initially uses a type of dynamic. You
can change the type of a dynamic VLAN to static.
11. Click the Add
button.
The VLAN is added to the switch.
Delete a VLAN
To delete a VLAN from the switch:
1. Connect your computer
to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch
a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 18 or Access the switch off-network on page 27.
The Local Device Login page displays.
Loading ...
Loading ...
Loading ...