Loading ...
Loading ...
Loading ...
24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Configure Switching User Manual151
6. Select Switching > VLAN > Advanced > Voice VLAN Configuration.
7. Select the Admin Mode Disable or Enable radio button.
This specifies the administrative mode for the voice VLAN for the switch. The default is
Disable.
8. Select the interface by taking one of the following actions:
• To configure a single interface, select the check box associated with the port, or type
the port number in the Go T
o Interface field and click the Go button.
• To configure multiple interfaces with the same settings, select the check box
associated with each interface.
• To configure all interfaces with the same settings, select the check box in the heading
row
.
9. From the Interface Mode
menu, select the voice VLAN mode for selected interfaces:
• Disable. This is the default value.
• None
. Allow the IP phone to use its own configuration to send untagged voice traffic.
• VLAN
ID. Configure the
phone to send tagged voice traffic. You must enter the VLAN
ID in the Value field (see the next step).
• Dot1p. Configure voice VLAN 802.1p priority tagging for voice traffic.
You must enter
the dot1p value in the Value field (see the next step).
• Untagged. Configure the phone to send untagged voice traffic.
10. In the V
alue field,
enter the VLAN ID or dot1p value.
This field is enabled only if you select VLAN ID
or Dot1p from the Interface Mode menu.
11. In the CoS Override
Mode field, select Disable or Enable.
The default is Disable.
12. In the Authentication Mode
field, select Enable or Disable.
Loading ...
Loading ...
Loading ...