Loading ...
Loading ...
Loading ...
24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Configure System Information User Manual124
If you do not know the IP address of the switch, see Access the switch on-network and
connected to the Internet on page 18 or Access the switch off-network on page 27.
The Local Device Login page displays.
If you did not yet register the switch with
your NETGEAR account, the Register to unlock
all features page displays. For more information, see
Register the switch on page 31.
4. Enter one of the following passwords:
• After registration, enter the local device password.
By default, the local device password is password
.
You must change this password
at initial login.
• If you previously managed the switch through the Insight app or
Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the local browser UI on
page 30.
5. Click the Login
button.
The System Information page displays.
6. Select System > Services
> DHCP Snooping > Binding Configuration.
7. From the Interface menu, select the interface on which the DHCP client is authorized.
8. In the MAC Address
field, specify the MAC address for the binding to be added.
This is the key to the binding database.
9. From the VLAN ID
menu, select the ID of the VLAN the client is authorized to use.
10. In the IP Address
field, specify the IP address of the client.
11. Click the Add
button.
The DHCP snooping binding entry is added to the database.
The Dynamic Binding Configuration table shows information about the DHCP bindings that
were learned on each interface on which DHCP snooping is enabled. The following table
describes the dynamic bindings information.
Loading ...
Loading ...
Loading ...