Loading ...
Loading ...
Loading ...
24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Configure System Information User Manual94
4. Enter one of the following passwords:
• After registration, enter the local device password.
By default, the local device password is password.
You must change this password
at initial login.
• If you previously managed the switch through the Insight app or
Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the local browser UI on
page 30.
5. Click the Login
button.
The System Information page displays.
6. Select System > PoE
> Advanced > PoE Port Configuration.
7. Select one or more ports by taking one of the following actions:
• To configure a single port, select the check box associated with the port, or type the
port number (for example, g1) in the Go T
o Interface field and click the Go button.
• To configure multiple ports with the same settings, select the check box associated
with each interface.
• To configure all ports with the same settings, select the check box in the heading row
.
8. From the Admin Mode menu,
select the administrative PoE mode of the port:
• Enable. The port’s capacity to deliver power is enabled.
This is the default setting.
• Disable. The port’s capacity to deliver power is disabled.
9. From the Port Priority
menu, select the priority for the port in relation to other ports if the
total power that the switch is capable of delivering exceeds the total power budget:
• Low. Low priority
. This is the default setting.
•
Medium. Medium priority.
• High
. High priority.
• Critical
. Critical priority.
The port priority determines which ports can still deliver power after the total power
delivered by the switch exceeds the total power budget. (In suc
h a situation, the switch
might not be
able to deliver power to all connected devices.) If the same priority applies to
two ports, the lower-numbered port receives higher priority.
Loading ...
Loading ...
Loading ...