Loading ...
Loading ...
Loading ...
24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Configuration Examples User Manual419
3. Configure the following settings for Class1:
• Protocol Type. UDP
• Source IP Address. 192.12.1.0.
• Source Mask. 255.255.255.0.
• Source L4 Port. Other
, and enter 4567 as the source port value.
•
Destination IP Address. 192.12.2.0.
• Destination Mask. 255.255.255.0.
• Destination L4 Port. Other
, and enter 4568 as the destination port value.
For more information about this page, see
Configure a DiffServ class on page 217.
4. Click the Apply
button.
5. On the Policy Configuration page, create a new policy with the following settings:
•
Policy Selector. Policy1
• Member Class. Class1
For more information about this page, see
Configure a DiffServ policy on page 230.
6. Click the Add
button.
The policy is added.
7. Click the Policy1
hyperlink to view the Policy Class Configuration page for this policy.
8. Configure the
Policy attributes as follows:
• Assign Queue. 3
• Policy Attribute. Simple Policy
• Color Mode. Color Blind
• Committed Rate. 10000 (which means 10000*16 kb/s).
• Confirm Action. Send
• Violate Action. Drop
For more information about this page, see
Configure a DiffServ policy on page 230.
9. On the Service Configuration page, select the check box next to interfaces g7 and g8 to
attach
the policy to these interfaces, and then click the Apply button. (See
Configure the
DiffServ service interface on page 236.)
All UDP packet flows destined to the 192.12.2.0 network with an IP source address from the
192.12.1.0 network that include a Layer 4 Source port of 4567 and Destination port of 4568
from this switch on ports 7 and 8 are assigned to hardware queue 3.
On this network, traffic from streaming applications uses UDP port 4567 as the source and
4568 as the destination. This real-time traf
fic is time sensitive, so it is assigned to a
high-priority hardware queue. By default, data traffic uses hardware queue 0, which is
designated as a best-effort queue.
Also the confirmed action on this flow is to send the packets with a committed rate of
1000000 Kbps. Packets that violate the committed rate and burst size are dropped.
Loading ...
Loading ...
Loading ...