Loading ...
Loading ...
Loading ...
24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Get Started User Manual34
4. In the Serial Number field, enter the serial number of the switch.
The serial number consists of 13 digits. The serial number is usually printed
on a label on
the bottom or the back panel of the switch.
5. Click the Register button.
The switch is registered with NETGEAR.
6. If the My Products does not display, click My
Products from the menu.
The page adjusts.
7. Select the radio button for the newly registered switch, and click the Get
Registration Key
button.
The registration key is displayed, and an email with the registration key is sent to your
NETGEAR account email address.
8. Change the
IP settings of your computer to be in the same subnet as the IP settings of the
switch.
If the DHCP client of the switch is enabled and you remove the switch from the network
with the DHCP server, the IP address reverts to the default IP
address of 192.168.0.239
with a subnet of 255.255.255.0.
Note: If you already disabled the DHCP client and assigned a static IP
address to the switch, change the IP settings of your computer to be in
the same subnet as the static IP address.
For more information about changing the IP settings on your computer
, see one of the
following knowledge base articles at the NETGEAR website:
•
Windows-based computer. See the following article:
https://kb.netgear.com/27476/How-to-set-a-static-IP-address-in-Windows
• Mac. See the following article:
https://kb.netgear.com/000037250/Setting-a-static-IP-address-on-your-network-a
dapter-in-Mac-OS-for-direct-access-to-an-access-point
(The Mac article is written for an access point but is also valid for a switch.)
9. Connect your
computer to the switch using an Ethernet cable.
10. Power on the switch by connecting its power cord.
1
1. Launch a
web browser.
12. Open a web browser, and enter http://192.168.0.239.
This is the default IP address of the switch. If you already di
sabled the DHCP client and
assigned a static IP address to the switch, enter the static IP address of the switch.
The Local Device Login page displays.
Loading ...
Loading ...
Loading ...