User Manual - Page 314

For GS724TPP-100NAS.

Loading ...
Loading ...
Loading ...
24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports
Manage Device Security User Manual314
The previous figure does not show all columns.
7. From the ACL Name
menu, select the MAC ACL.
8. In the Sequence Number field,
enter a whole number in the range from 1 to 2147483647 to
identify the rule.
9. From the Action
menu, select the action that must be taken if a packet matches the rule’s
criteria:
• Permit. Forwards packets that meet the
ACL criteria.
• Deny. Drops packets that meet the ACL criteria.
10. In the Assign
Queue
field, specify the hardware egress queue identifier that must be used
to handle all packets matching this ACL rule.
The range for the queue ID is from 0 to 7.
11. From the Mirror Interface
menu, select the specific egress interface to which the matching
traffic stream must be copied, in addition to being forwarded normally by the switch.
This field cannot be set if a redirect interface is already configured for the ACL rule. This
field is visible for a Permit action.
12. From
the Redirect Interface menu, select the egress interface to which the matching traffic
stream must be redirected, bypassing any forwarding decision normally performed by the
switch.
This field cannot be set if a mirror interface is already configured for the ACL rule.
13. From the Match Every
menu, select whether each Layer 2 MAC packet must be matched
against the rule:
• True. Each packet must match the selected
ACL rule.
• False
. Not all packets need to match the selected ACL rule.
14. In the CoS
field, specify the 802.1p priority that must be compared against the information in
an Ethernet frame.
The range for the priority is from 0 to 7.
15. In the Destination MAC
field, specify the destination MAC address that must be compared
against the information in an Ethernet frame.
The format is xx:xx:xx:xx:xx:xx. The BPDU keyword can be specified using a destination
MAC address of 01:80:C2:xx:xx:xx.
Loading ...
Loading ...
Loading ...